Showing posts with label programmable. Show all posts
Showing posts with label programmable. Show all posts

8/01/2012

Universal Remote Control MX-810 Custom Programmable Remote Control with PC Wizard Software Review

Universal Remote Control MX-810 Custom Programmable Remote Control with PC Wizard Software
Average Reviews:

(More customer reviews)
Some of what follows is no longer valid, including reference to the "very attractive" price. See my entry dated 10/1/10 in the comments below for the updated story. Here's what I wrote back in '08:
The price advertised here is very attractive, but anyone contemplating it should do some research on Universal Remotes' VERY aggressive limitations on support. URC has been focusing their business more and more on professional installers and high end dealers. If you buy this remote from anyone but an authorized dealer you will get one download of the programming software from URC. You will NOT be able to get updates for software improvements or codes for new equipment, which are available only through authorized dealers. You also won't get any warranty service from URC if anything goes wrong. (Neither Amazon nor the dealer they're representing here are authorized URC dealers.)
This policy is obviously pretty controversial among the Home Theater and enthusiast crowd. You can find lots of yelling about it in the various forums. So far, however, URC is hanging tough.
You can find the relatively short list of authorized online and B&M dealers on the URC website. They all charge around $400 for the MX-810.

Click Here to see more reviews about: Universal Remote Control MX-810 Custom Programmable Remote Control with PC Wizard Software

The Universal Remote MX-810 is a full featured remote control with a color screen. It is programmed via PC Wizard Softwareand can be used with the MRF 260 which makes it RF controlled. This means you do not have to aim the remote at the device to adjust the settings.

Buy NowGet 20% OFF

Click here for more information about Universal Remote Control MX-810 Custom Programmable Remote Control with PC Wizard Software

Read More...

5/24/2012

Universal Remote Control MX-350 Osiris IR/RF Remote Control ( 8056 ) Review

Universal Remote Control MX-350 Osiris IR/RF Remote Control ( 8056 )
Average Reviews:

(More customer reviews)
I bought two of these remotes with a pair of base stations for the two home theatres in my home. I have multiple components in each system, and custom built-in cabinets hide all the components except for the TVs. Since these remotes use radio frequency (RF) instead of (or in addition to) infrared (IR) pulses, I now can use my theatres while keeping the cabinet doors shut for a tidy appearance. They have multiple channels so it's possible to use many systems in the same home without interference. No PC is necessary for setting them up. There are some tips on the remote control forums online if you have a question not answered in the user's guide. Overall, worthwhile for an average user with multiple components -- especially if you need RF capability.

Click Here to see more reviews about: Universal Remote Control MX-350 Osiris IR/RF Remote Control ( 8056 )



Buy Now

Click here for more information about Universal Remote Control MX-350 Osiris IR/RF Remote Control ( 8056 )

Read More...

3/14/2012

Universal Remote Control MX-850 IR/RF Aeros Remote Control Review

Universal Remote Control MX-850 IR/RF Aeros Remote Control
Average Reviews:

(More customer reviews)
Are you kidding me? The people touting this remote must be professional programmers hoping you will unsuspectingly buy it (like I did) and then have to hire them to program it. I consider myself somewhat tech savvy, but this is ridiculous. If you want to do it yourself, start by downloading the 72 page programming manual (That's right - 72 pages). The programming manual for the MX-850 is intended for professionals (they actually talk about getting the client to approve the cost of reprogramming whenever the cable company makes channel lineup changes). If you can figure out the programming manual, then you have to download the programming software (if you can get it on the internet). Then you realize the device is not USB compatible (Is it 1998 all over again?). So then you have to go out and buy a $35 serial port to USB converter, install the software for the converter and hope it works. Then the fun really begins when you try to navigate the software and get it to communicate with the remote and do what you want it to do. I previously owned the MX-500 which was easily programmed from the remote itself. The product description for the MX-850 is deceiving in my opinion because it makes it sound as if the remote is easily programmable. It is not. Unless you don't mind spending the money to hire a professional, I'm with the other reviewers who say this remote is far more trouble than it's worth.
UPDATE: OK, I've calmed down considerably after working with this remote for a week. I was able to download the programming software off the internet (URC still restricts software updates to authorized professionals so you will not be able to automatically install IR codes for the latest equipment). Be prepared to spend some time learning how to program the remote yourself, but it can be done. It is a very nice remote once programmed. Tactile feel is great (I would stay away from touchscreen remotes). The new center select button is a huge improvement over older models. After having used the remote for awhile, I would change my rating from one star to three. I would still stay away from this remote unless you have the knowledge and patience needed to program it using the URC software. And to the reviewers who resort to name calling and giving higher ratings only to counteract opinions of others they don't agree with: grow up.

Click Here to see more reviews about: Universal Remote Control MX-850 IR/RF Aeros Remote Control



Buy NowGet 35% OFF

Click here for more information about Universal Remote Control MX-850 IR/RF Aeros Remote Control

Read More...

3/13/2012

Universal Remote Control MX-450 Custom Programmable Remote Control with On-Screen Macro Editing. Review

Universal Remote Control MX-450 Custom Programmable Remote Control with On-Screen Macro Editing.
Average Reviews:

(More customer reviews)
Let's all agree that it does not require an advanced degree in computer science to program a remote control. In the case of the MX-450, neither does it require a "Professional" installer (whatever THAT means).
If you know or can figure out with a little bit or web surfing (a) which components need to be turned on and what inputs and outputs should be selected, (b) what is the difference between IR and RF, (c) what an IR emitter or blaster is, (d) what a delay is, and (e) that you need a Power Off macro to turn off all the devices in your system, you can easily program this remote. It might take a little bit of trial and error and a little bit of patience, but no more than any other "Consumer" remote control that I have seen so far.
Put another way: If you can read the directions and figure out how to program a Logitech Harmony remote at some basic level (and especially if you have already done so), you can read the directions and figure out how to program this one and probably in less time. You might have to start over again once or twice while you get familiar with the guided setup, but the step-by-step software is so simple that even a "professional" installer could probably figure it out :)
My experience: I initially owned a Universal Remote Corporation MX-900 which was installed and programmed for me by a "Professional" AV company that shortly thereafter went out of business. I was irritated at URC because they would not provide me with access to the programming software for my MX-900. They said it was for "Licensed Dealers Only" which is their way of saying "Professionals". It was a great remote, but I was no longer willing to pay somebody $300 every time I wanted to tweak the picture or add/upgrade a component (e.g., adding an XBox, swapping the DVD for a Blu-Ray, etc.) and a few things with the way mine was programmed were really irritating.
To replace that, I purchased a Logitech Harmony 900 and had the exact experience as everyone else who purchased it did: bad RF range and performance. I tried every creative workaround you could think of, to no avail. If the RF worked, it would be a great remote. But it doesn't.
URC adveritizes this remote as being for "Professionals", which initially scared me off, but the cool thing about the MX-450 for the DIY folks like me is that, since you don't need a PC, there is no software required to program the remote.
Correcting some previous reviews, URC offers for download from its web site support section a helpful Archiver program that allows you to update the remote firmware and ir codes database via a USB cable -- just like the Harmony remotes, but much simpler. It also allows you to make a backup copy of your remote configuration in case you have a problem later on and need to do a factory reset or restore your settings. (For the non-pros like me, I strongly recommend making multiple backups along the way as you add more and more cool macros and other programming.)
In my case, I spent about an hour surfing through the internet reviews and reading the 12 page manual before I took the thing out of the box. It probably took me another 4 hours in total to program the remote over the course of one evening. That includes my Denon AVR receiver, my Sony TV, my Sony Blu-Ray player, my AppleTV, my Xbox, my HDRadio and my wife's Wii Fit (all hidden in the next room and connected to our whole-house audio system). I used the macro feature to create six macros on the Main page that emulate Harmony-style "Activites" -- e.g., to watch Tivo, you press the "Watch Tivo" button and the remote does the rest. Favorite channels can be done in under 10 minutes. It probably took me another half-hour to install the IR emitters, the base station and the RF antenna and do the RF programming on the remote to make each component RF only with its own ir address. BTW, the URC manual for the MRF 350 base station is really easy to follow and the RF settings on the remote itself are self-explanatory.
The guided programming is not as elegant as what you can do on a PC, and I had to start programming devices or macros over again once or twice, but the learning, macro and cut and paste functions are really helpful and easy. You can do just about anything that you can think of with this remote so long as you are a little bit organized. My unit gives me RF range to almost 100 feet through two interior walls and the performance has been reliable, even during long macros.
I highly recommend this as an alternative to other high-end RF remotes for DIY folks like me.

Click Here to see more reviews about: Universal Remote Control MX-450 Custom Programmable Remote Control with On-Screen Macro Editing.

The Universal Remote MX-450 is a future featured remote control with a color screen.It can be programmed to use RFcontrol with the addition of the MRF-260 base station.This means you do not have to point the remote at the device you are controlling to adjust your settings.

Buy NowGet 23% OFF

Click here for more information about Universal Remote Control MX-450 Custom Programmable Remote Control with On-Screen Macro Editing.

Read More...

2/20/2012

Universal MRF-350 RF Base Station Review

Universal MRF-350 RF Base Station
Average Reviews:

(More customer reviews)
Simply superb. I have two of these, the IR blaster alone nearly burns a hole in the wall :) I have it controlling in the home theatre a Onkyo NR905 7.1 system, XBOX 360, XBOX (Media Centre), AppleTV, HD TV Receiver, out of sight and in a Panasonic LCD HD Projector. Thats all downstairs and upstairs in the living room a Onkyo 5.1, XBOX Media Centre, LCD HD TV. No problems, at all, good price, simple & just perfect. That along with 3 MX-850's (which in themselves are just FANTASTIC, forget expensive Pronto's etc, these remotes are are simple, confortable and just WORK!!!
For a good comprehensive review have a look at http://www.remotecentral.com

Click Here to see more reviews about: Universal MRF-350 RF Base Station



Buy NowGet 24% OFF

Click here for more information about Universal MRF-350 RF Base Station

Read More...

8/18/2011

Sangean RCR-5 Digital AM/FM Clock Radio Review

Sangean RCR-5 Digital AM/FM Clock Radio
Average Reviews:

(More customer reviews)
I have nothing but praise for the Sangean RCR-5 clock radio. Specifically, here are the most noteworthy aspects of this truly amazing product:
Display
Here is where the RCR-5 truly shines, as it incorporates a backlit LCD with adjustable intensity: one may adjust the backlight to suit your needs, so you have a perfectly legible, yet not too bright display (at night) which can never be "washed out", even in direct sunlight. The display even has a clever feature whereby it will illuminate to full intensity when any of the buttons are pressed, after which it returns to the user's preset intensity after ten seconds. As you can see from the product photos, the display is of a soft, warm color, most conducive to a good sleeping environment; other clock radios using bright blue or green illumination, IMHO, should be avoided if you want to get any sleep.
Auxiliary Input
Very useful for listening to my podcasts at night; when an external source is attached, the Band button will cycle through AM/FM/AU; when none is attached, only AM/FM are available, thereby eliminating "clutter" for those who do not wish to enable this feature. (Note: I'm old-school, and prefer using this method over a "Dockable" iPod solution, as I prefer to completely run my iPod's battery source to zero before recharging...)
Flexibility in Programming
Only found on more expensive clock radios, this model will allow you to use the "Sleep" feature to listen to a particular station (or podcast with the Auxiliary feature) at night, and then to wake to radio on a different station. In addition, all alarms allow Daily, Mon-Fri, or Single, with the Audible Alarm using a gentle "ramp-up" feature.
Reception and Speaker Quality
The radio's receiver portion of this product is very good, rivaled by only my Sony short wave receiver (a great radio, by the way!); what looks like a 3-inch speaker provides a very warm, intelligible output, very suitable for the spoken word, adequate for music. If you need a strong system for powerful music, I would suggest purchasing an additional desktop speaker setup (such as for a computer) which can be attached to the headphone output by means of a standard mini-jack connection.
Finally, a no-nonsense Sleep function
Sangean has cleverly incorporated the Sleep function into the Power button (which is gently illuminated when the radio's off); to turn the radio on or off, press the button. To use the Sleep feature, press and hold the same button to select up to 120 minutes. Simple, effective, "it just works".
Final Recommendation
Well, what more can I say? This product works for me (and I'm purchasing three more for gifts) and has a lot going for it, including high value (very reasonably priced!). Is there anything that you should be aware of? Yes:
> As described in the previous customer's entry, setting the alarm may require a few extra key-strokes, as this product offers many options when it comes to waking by either the alarm or the radio; if you do not need all of these features, you may wish to consider something of simpler means. That being said, it took me only about 22 seconds to set the alarm; for me, it was relatively intuitive and logical.
> The built-in battery back up feature only works for about ten minutes worth of backup, according to the manual; in my neck of the woods, this is not a big issue, but should be noted if you experience many nighttime blackouts where you are located.
> Even though this model is referred to as an "RCR-5", it should be noted that it does not employ an automatic time synchronization feature as is found on Sangean's higher end clock radios. (Not a big issue for me, and may actually be desirable for those of us who prefer to set our clocks 5, 10, or 15 minutes fast to "keep us on time"!)
I hope this helps you in making the right decision! All the best!

Click Here to see more reviews about: Sangean RCR-5 Digital AM/FM Clock Radio



Buy NowGet 28% OFF

Click here for more information about Sangean RCR-5 Digital AM/FM Clock Radio

Read More...